Bambu PET-CF printed with orientation to test layer strength. Results very similar to PA6-GF except PA6-GF breaks like glass, not on the layer lines. To be clear, it’s possible to use better orientations and custom model changes to reinforce things, I don’t consider that reliable though.
The 43X got around 6 shots before splitting apart. This is the 6th attempt with various filaments and models of 43X, they all suck. Using Aves rails. Might have buy the real thing.
The 1911 fired one single 45 and it’s done. Machined the rail myself 6061. First attempt. It’s too bad, this thing was so smooth.
Polymaker pa6gf25 has been great in my experiences, as long as its not annealed the filled nylons get quite brittle post anneal if my XD45 survives the weekend, it will be over 200 rounds on an un annealed frame