In incus, I had the same setup of an LCX container with a Docker container inside of it. I passed 1000/1000 to the LXC container but the LXC container’s default root user has a an ID set of 0/0. So I had to pass 0/0 to the Docker container, not 1000/1000 to get the read/write permissions working.

That may fix your issue as it’s basically the same tech, just different automated things implementing the LXC container!

Good to know Proxmox’s bad updates are more pervasive than the latest bad update.

I have been able to install Docker in the LXC containers and pull images in with the normal commands. I do that container-in-container to get effectively rootless docker containers for stuff that I couldn’t figure out how to run rootless. So you don’t even lose out on docker if you’re determined! And as you said incus goes on any OS, you can docker just fine on the base OS of your choice and use incus for specific things!

Try a diff email if you do want one, a friend recently got one via email signup and wait a few weeks. But I do abs agree it fuckin sucks you have to do any of this effort to get one, it is just enabling scalpers

I do use it to hold internet-exposed things in LXC containers to sidestep having to figure out how to not run things as Docker root.

You do not need it for everything, but since it’s not an OS that makes it your everything, that’s ok! Run Docker containers as you need, put internet-exposed ones in an LXC container, put home assistant in a VM because it’s special.

Ah, I was wondering which one you updated and it made your containers inaccessible!

You have to sign up for the in stock notifications, annoying but it works in a delayed fashion. Sad it does enable scalpers.

Incus or Proxmox (e.g., should I shift to Incus LTS or something?)

Incus is way easier to work with than Proxmox, and it sits on your OS of choice instead of being the OS you must use. For home use it’s way easier to use with the web ui, it even has clustering if you want to go hard.

So you can install Incus when you want a VM/LXC container and not have to commit to a VM/LXC container OS from the start.

Also Proxmox free just had a bad update that björked some stuff if you updated when it was live. Proxmox free is rolling and apparently lacks basic sanity checks for updates.

Your budget is really near a https://store.ui.com/us/en/collections/unifi-dream-router/products/udr Unifi dream router. Your family is gonna be way happier with you (0 downtime) and it’ll give you extender options if you ever need it. Unifi is good enough and they update regularly, just disable cloud access stuff and you’re good.

Otherwise you want Opnsense instead of Openwrt. The upgrade process for Openwrt is not automatic, while Opnsense is. Worth it not to have to dote on your router.

And you should get an access point (Unifi something or Tplink Omsomething), wifi is problematic with openwrt and I’m not sure if opensense even lets you do it (haven’t tried).

And you’ll need a switch, dumb or managed, up to you if you want VLANs. The Opnsense box will have just one LAN port, so it requires a switch if you want to plug more than one thing into it. A switch with PoE+ can power the access point directly.

Opnsense needs x64 arch (Intel or AMD CPUs), get a small thin client like a Dell Wyse 5070 extended or HP T730 or that mentioned Fujitsu Futro S720 (its CPU is old tho, you can do better). There may be newer thinclients, you just want a mini PCIe slot to install some Intel gigabit card from eBay with 2 ports. Google power efficient gigabit mini PCIe card - there’s an older model that sucks power and a newer one that doesn’t suck; if you go more than gigabit skip 2.5 on Intel unless you google hard and expect extra power draw. Very limited point to 4 port cards, just go higher gigabit speeds don’t think about multiplexing ports or whatever it is called; and switches switch better than the router can and remove CPU overhead for more actual routing work - 2 port card is the way.

Slap Incus (superior but newer, less guides, LXD is previous name if googling stuff) or Proxmox (good enough, more guides for this) on it, make a VM and pass through the 2 ports of the PCIe cards, slap Opnsense in the VM. Make an LXC container and slap Debian on it and spin up the Unifi controller for your AP. Another container for adguard home or pi hole and you’ve got a box that does the basic nets all in one. The built-in port on the thin client is how you will access the underlying OS, it gets plugged into the switch you’ll have to get. If you got something with 2 gigs of RAM and an AMD Geode/GX or aged Intel Atom CPU I’d just only do Opnsense no hypervisor stuff.

Sorry for the info dump but there’s a lot of angles!

But really, the Unifi dream router is much easier and solves it all-in-one. You need 3 pieces (router, wifi access point, Ethernet switch) for a good experience otherwise.

It looks like regular PSUs are isolated from the mains ground with a transformer. That means that two PSUs’ DC grounds will not be connected. That will likely cause problems for you, as they’ll have to back flow current in places that do NOT expect back flow current to account for the voltage differences between the two ground potentials. Hence it might damage the GPU which is going be the mediator between these two PSUs - and maybe the mobo if everything goes to shit.

Now I am not saying this will be safe, but you may avoid that issue by tying the grounds of the two PSUs together. You still have the issue where if, say, PSU1’s 12V voltage plane meets PSU2’s 12V voltage plane and they’re inevitably not the same exact voltage, you’ll have back flowing current again which is bad because again nothing is designed for that situation. Kind of like if you pair lithium batteries in parallel that aren’t matched, the higher voltage one will back charge the other and they’ll explode.

Old AMD cards can be flashed with any BIOS that says anything. Maybe the card was used for a scam and flashed to say it’s an RTX 2070, it should have a switch to go to its 2nd BIOS near the top left (when slotted in). And if it doesn’t, you can just get its original BIOS off of Techpowerup’s database and flash it with atiflash, also from Techpowerup.

Picture stolen from some Reddit help thread for a red dragon RX 580.

This is assuming that Linux is reading what the card claims it is correctly. Which seems likely, since reading device IDs is a really important feature that probably works nearly perfectly.

It accomplishes the same thing as Proxmox (VMs and LXC containers, which are “lite VMs” for if you wanted a Linux VM), I recently learnt about it too! It is new, but it was backed by Canonical up until the LXD/Incus split so it’s very solid. Split because Canonical tried to control LXD heavily, so they forked and renamed it Incus.

I just used Incus and it’s very nice, use the profiles to create a profile for “GPU pass through” and “macvlan”, among others you’ll find you want. Then make instances as needed! It was easier for me to use than Proxmox.

First try an HDMI dummy plug, in case the thing doesn’t dig no screen (classic intel firmware)

Then try Debian + Incus, less Proxmox shims to go wrong. Install Incus via the “zabby” repo mentioned on the incus install page. Search for “LXD” if Incus help/guides aren’t enough for you, they’re the same thing (for now). Providing an ISO in Proxmox is really clunky, and incus smooths that out so nicely. And again, less Proxmox shims to go wronk

That is straightforward, and if you recovered nextcloud like that it does say something about the robustness!

Dunno how I missed that in borgmatic, and I see autorestic also has “hooks” but with no database-specific examples. So I can build out what would be in a long ass script just in a long ass borgmatic/autorestic yml!

Thanks for taking the time to upload the whole thing!! This is pretty cool because it moves the backup work straight into the container with the db

Would you mind pastebin-ing your docker image creator file? I have no experience cooking up my own docker image.

Thorough, thanks! I see you and some others are using “asynchronous” backups where the databases backup on a schedule and the backup program does its thing on its own time. That might actually be the best way!

I’m coming from rsync too, hoping for the same good stuff

It’s gon b long ass backup script I think!