This has been the case since SATA revision 3.3, released Feb 2016. So while I may have exaggerated with “ancient”, a brand new PSU certainly shouldn’t still be feeding 3.3v to that pin.

I have done this with dozens of drives and have never had to do any pin blocking. You only need to do that if you’re using an absolutely ancient sata power cable that doesn’t know about the spinup pin change

Not impossible at all, but there would be similar judder without some compensation. It’s pretty normal for 144hz monitors to support being driven at 60fps, but it’s pretty abnormal for a 60hz monitor to advertise 48 or 24fps via edid. Most modern 60+hz TVs are perfectly capable of doing so, though.

Either way, that’s one reason I’m very happy with the 240hz wave that seems to be going on. You can display 24 and 60 fps content simultaneously with no judder, as well as even higher frame rate content.

That combined with the popularity of VRR and free/g sync makes me even more optimistic for people to see just about everything the way it was meant to be seen

One of the big benefits of 144 and 120 over 60hz display is actually how well they render lower frame rate content. Watching a 24fps (so cinematic!) movie on a 144hz ``display results in a new frame every 6 refreshes (or 5 for 120hz). With a 60hz display, you get an new frame every 2.5 refreshes. Generally this results in judder where every other frame is displayed for longer than the others

Would love to see a movie mastered in 1kfps though lol

It certainly is. ISO 27001 is a framework, not very prescriptive at all. Basically an auditor will ask “how do you ensure data isn’t leaving your facility in the form of discarded hardware?” If you say “here’s a link to our media destruction policy. It says all drives are wiped according to NIST 800-88 cryptographic erasure. If that is not possible or not applicable, the drive is destroyed. Here’s our log of decomissioned equipment” chances are very good they’ll say “OK great let’s move on to the next one” with only minor followup questions.

Op said they tried without the firewall connected and had the same results

All of that is inherent in self hosting anything publicly accessible. You wouldn’t start off a reply to someone setting up openvpn with “you’re in for a world of hurt,” would you?

As someone who also has 15+ years of experience in the field and is currently infosec management, it’s not that bad. Certainly not something I’d say “you’re in for a world of hurt” about like somebody just bought a bad timeshare.

Especially if you’re not hosting production email for a company and you’re not leaving the server as an open relay, it isn’t very painful at all.

You could also be less condescending, but as you said: your call. :)

Personal preference: Jellyfin instead of plex

Some that I run that you don’t seem to have anything for:

• Lancache (if you have several gaming PCs on the network or host any kind of lan party)
• surveillance camera software e.g. shinobi
• I see grafana, but other monitoring services like icinga, librenms, etc
• Mayan EDMS - I’ve found this really helpful as anything I get in the mail, I scan in, and this makes it all searchable and retrievable.
• There’s a whole hole you could dig if you start getting into home automation (I use home assistant)