Anyone figure this out yet? I’m losing my mind. I saw chairmanwon was working on a jig but it never released and I looked around for a beta but didn’t find anything on DDRC or BLC.
Anyone figure this out yet? I’m losing my mind. I saw chairmanwon was working on a jig but it never released and I looked around for a beta but didn’t find anything on DDRC or BLC.
do you mind releasing a step so i can try bending a flat using a hammer/press method ?
personally, i don’t think my jigs are really ideal.
this is what i think would be promising, but they would be laser cut from scs, then you just smash the metal jigs together to bend the rxm flat.
ok… well hopefully a DIY solution is figured out sometime soon.
right, i’ve been talking to another guy. we’re trying to get something DIY without a press, but it’s seeming like a press might be needed. like you can get away without one and make a usable fci (i assume) but a press would really be the icing on the cake.
a press is relatively inexpensive so using one should be the ideal route for DIY purposes.
yeah that’s true. less than $200 isn’t too awful. i don’t have a press though unfortunately, just a vise.