I cant pull back the slide all the way. The thing is completely built… trigger pin, charging handle, etc. However, I cant pull the slide all the way back… The slide fits onto both front/rear rails. I just cant pull the slide beyond that. I can take the slide down using the takedown button. So… what am I missing here ?
Ive built numerous glock frames… so not a newbie…
Thoughts ?
Definitely a typo. SP00308 is the part number for a two-pin G17 locking block. The spring bearing LCI should be part number SP02714, and there should be only one. Actually, most of these Glock parts appear to have incorrect part numbers (several of which don’t even show up on the Glock Armorer’s Parts List):
Depressor Plunger - SP00337 (should be SP00112) Extractor - SP01903 (should be SP01895) Firing Pin (Striker) - SP01193 (should be SP00063) Locking Block - SP04361 (should be SP07894-1) Locking Block Pin - SP04368 (correct) Slide Lock - SP02919 / 2912-3 (should be SP00301) Spring-Loaded Bearing - SP00308 (should be SP02714) Spring-Loaded Bearing - SP00308 (should be Depressor Plunger Spring SP33522) Trigger Pin - SP00408 (should be SP00420) Firing Pin Spring - SP00063 (missing from BOM)
this is no bueno… thanks for the correction. i noticed the ‘typos’ as well, but figured i was searching incorrectly. but im familiar enough with glock parts that i was able to read through the BOM typos.
Good catch. I was searching the part number and the provided part name so that discrepancy was flying right over my head.