Only things you will need to change is your line width. I have finally tried a .6 nozzle for those of you asking if my settings will work for it. I set all of my line widths to .5 and I run the layer height at .12 or .15 depending on how detailed you want to get. That’s the only things you will need to change in my settings in order to get a great print with a .6 nozzle.
So I swapped to a 0.6 nozzle. If I change the setting in Orca to 0.6 from 0.4. It wont let me use your 3mf profile. So not sure if im understanding your post. Youre saying all the has to change is the line width? Nothing else? Or should I rebuild your profile in the 0.6 and then make sure all line widths are 0.5 like you say.
I didn’t think about it messing with the 3mf file and not allowing you to just change the nozzle and line width size. I will make a new 3mf with the .6 nozzle and upload. It’s all the same setting and the only thing different is line width and size of nozzle.
I appreciate it man. I went ahead and rebuilt the profile in the 0.6 nozzle version and after recalibrating everything, it seems to be working well.